Cold Stamped & SubAssemblies

Cold Stamped & SubAssemblies

Cutting Edge Technology in tool making
enables us to produce top quality short run stampings.

Types of Parts
Standard tolerances for our production are ± 0.005 in. on lineal dimensions and ± 0.0015 in. on hole diameters. We work in any material which can be cold stamped. Most jobs we run are in the thickness range of 0.020 in. to 0.250 in. We have a press capacity to 150 tons and maximum die capacity of 28 in. to 40 in.
We perform secondary operations and subassembly
Dynamic is truly a one-stop source for short run stampings because we perform all standard secondary operations as well as subassembly. These procedures are subject to the same complete quality system used in our stamping department. Equally important, every job, whether simple or complex, is shipped on time.

Location:
Cold Stamped & SubAssemblies

P.O. Box 307
W225 N6328 Village Drive
Sussex, WI 53089

phone: (262) 246-4433
fax: (262) 246-8080

low cost | short runs | high quality | contact us | home page

Copyright © 2007 Dynamic Stampings, Inc. All Rights Reserved.